My reviews for GFS have been moved to “The Firearm Blog”

Hello all I wanted to announce I will be writing gun reviews weekly for the online gun shop and accessories dealer Guns for Sale.com. These reviews will be posted from now on at “The Firearm Blog”—link above:-) I will still post on Gunners Journal.
My ethics that apply to the blog will be in place as always so the reviews you read on Guns for Sale.com will be 100% correct and honest to the best of my ability.
Your questions and comments can be posted on their website and I will respond as quickly as possible as has always been the case here. They are good folks and I encourage you to look over the guns they stock at very fair prices.
The first article should be out in the next week or so.

Happy Shooting,
Phil
Gunner777

Rock Island Armory Match 1911

December 13, 2008

Everyone who has read my blog knows how much I love Rock Island Armory 1911′s. As I have said before they are the best buy bar none in a 1911. The newer “Rock” Match version is just another example of a company that listens to the customer base and produces a fine pistol at an unbelieveable price!
I was at our police department range a week or so ago and ran into a friend who had just purchased a Rock Island Armory Match grade pistol. Yep, I was drooling to get my hands on this one. I’ve been looking for one for a month or so without much luck but at least I got to shoot one.
I told him I would let him shoot my Sig if he would let me play with his new toy:-) He had already fired about 200 rounds through it with no problems at all. I happened to have 150 rounds of 45 ball so off I went to give this fine looking pistol a workout.
This pistol has the fiber optic front sight which I find very useful and easy to pickup as well as being fast. The rear sight is the Millett type that adjust for both windage and elevation and is very precise in it’s adjustment. The perfect setup if you compete in stock class competition. The pistol felt the same as the Rock Tactical I’m so fond of so it was a no brainer getting used to. The controls were very smooth. The action was something I noticed right off as being smoother than the Tactical was when it was new. There was definately some hand fitting with this pistol.
Shooting held no surprises. It was very accurate and produced a ragged hole at 10 yards and at 15 was more accurate than my Tactical again giving excellent results. At 25 yards the pistol really shined and once again produced a group measuring roughly 3 inches with 4 magazines fired. Again, very obvious a bit of extra work went into this pistol. I completely enjoyed shooting this pistol and it just renewed my desire to find one of my own. The way it is equiped is very similar to the S&W Doug Koenig but at a far lower price. It’s every bit as good a pistol as the S&W even if it is a bit more utilitarian in looks. That is not to say it’s an ugly gun by any means. I find the fit and finish of these pistols to be very appealing.
Steve Clark is a man I’m glad to call a friend wrote a fine review for the M1911.org website and graciously allowed me to publish his review of the Rock Island Armory Match 1911. A thorough job as always and I’m sure you’ll enjoy his contributed review.

Recently, I tested a target-style pistol from STI, called the Spartan. This pistol was unique in that STI International chose to use major components (frame, slide, and barrel) manufactured by Arms Corporation of the Philippines (better known as Armscor). During the time I was waiting for the STI Spartan to arrive for testing, I learned that Rock Island Armory was planning to release a target grade pistol too. My imagination began to run wild!

I fully expected the Rock Island Armory Match pistol to be at least a fraternal twin of the STI gun. Initial inspection of the RIA Match revealed a great many similarities, such as a fully adjustable rear sight, orange fiber-optic front sight, parkerized finish, etc. However, closer inspection disclosed some features that instantly got my attention. These not-so-subtle additions had me “itching” to inspect the pistol further, take some photographs, and give it a thorough work-out on my personal firing range. I live in a rural part of Texas, where such facilities are normal.

The Rock Island Armory Match (per the label FS Match) comes packaged in RIA’s black plastic clam-shell case. The interior of the case is lined in egg crate foam, and the pistol was double wrapped in a plastic bag and bubble-wrap bag. Two black 8-round Novak magazines were included in my package (although the pistol will ship with one 8-round magazine). Under the foam lining, one will find a fired cartridge casing, the owner’s manual, a warranty card, a firearms safety pamphlet, and a card entitling the pistol’s owner to buy Armscor ammunition at a 10% discount, if he or she joins (or is already a member of) M1911.ORG. I would also like to stress that this is the first review of the RIA FS Match. No other printed or electronic publication has reviewed this pistol, so this is another first for M1911.ORG.

The Pistol

The RIA Match is a full size (5-inch barrel) 1911, chambered for the .45 ACP cartridge. Inspection of the left side of the manganese phosphate treated slide reveals the company’s logo and Rock Island Armory, roll marked in block letters. The right side of the slide lacks any markings. The ejection port is lowered and flared for improved ejection of spent cartridge casings. There are no front cocking serrations on the slide of the RIA Match. The rear cocking serrations consist of nineteen straight lines, such as those found on G.I. type 1911s. The slide fits snugly on the frame, which has a Parkerized finish applied to its surface. The exterior finish on both the slide and the frame create quite a pleasing visual. There is no movement laterally between these two major components. I was informed that the Rock Island Armory Match is not part of a regular production run at the Armscor factory, but rather the slide and frame are hand-fitted in the Armscor Custom Shop. This extra attention to detail is evident when holding the pistol, as there is no rattle when the gun is shaken. In addition, the entire RIA Match pistol has been moderately de-horned, and the effect of this treatment should be apparent in the photographs. It most assuredly is noticeable when handling the pistol. Hand cycling of the action is effortless, in part aided by the excellent cocking serrations, but mostly because of the fine fitting of the slide to the frame.

The LPA rear sight of the RIA Match is mounted on the top of the slide, and is fully adjustable for both windage and elevation. This sight blends in well with the rear of the slide, and its rear face is horizontally serrated to reduce glare. The front sight is dovetailed nicely into the top of the slide, and its edges are rounded into the slide’s contour. This sight features a bright orange fiber-optic tube.

The slide stop/release is checkered, as is the magazine release button. The trigger has a serrated face with two elongated cutouts. There is no externally adjustable over-travel screw on the RIA Match. Trigger pull was characterized by a very small amount of take-up, with a crisp release of 4.25 pounds, from the box. This was a consistent measurement, meaning the sear released at 4.25 pounds, every time that the trigger was squeezed, or activated by the RCBS Trigger Pull Gauge.

The hammer has a true half-cock notch, and is an elongated Commander-style unit. Mated to the hammer is a beaver-tail grip safety utilizing an extended palm swell. The ambidextrous safety has a serrated shelf on both the left and right controls. These shelves are extended, and the right side is secured by a small cut in the sear pin, which corresponds to a small shelf on the bottom of the safety. Operation of all safety devices is positive and reliable. The magazine well is slightly beveled for easier insertion of the magazines. The pistol is easily loaded, as fully charged 8-round magazines slide into place with an authoritative click. When released, empty magazines fall free with no resistance. The flat mainspring housing is serrated, and fitted nicely to the frame of the RIA Match.

The stocks provided with the Rock Island Armory Match pistol are finely grained wood, and compliment the business-like looks of the gun. Sadly, my example had a small crack from the top of the left side grip screw to the top of the stock. This was the only cosmetic problem that I encountered in my inspection of the pistol. This minor defect is covered under Armscor’s Limited Lifetime Warranty.

Disassembly

The field stripping procedure to be followed with the RIA Match .45 ACP is different than for other, full length guide rod equipped full size 1911 type pistols. Field stripping the RIA Match proved to be much easier than was the case with either the previously tested RIA Tactical or the STI Spartan. Make certain that the pistol is unloaded and the magazine has been removed. A non-marring bushing wrench easily depresses the recoil spring plug so that the barrel bushing may be turned clockwise. Carefully allow the plug to exit the muzzle area, relieving all recoil spring tension. The slide can then be moved to align the take-down notch with the slide stop. After the slide stop is removed from the frame, the slide and frame can be separated. After that, it is a simple procedure to remove the recoil spring and full length guide rod. Turning the barrel bushing counter-clockwise will line up the bushing for removal from the slide, and the barrel can be taken out toward the muzzle. There is no firing pin safety on the Match pistol, so firing pin and extractor removal is accomplished following standard procedure.

Reassembly is in reverse order.

While I am admittedly no big fan of full length guide rods, the ability to use a bushing wrench is preferable to lining up the take-down notch with the slide stop while the pistol is still under the tension of the recoil spring. I applaud Rock Island and Armscor for this improvement.

Shooting the RIA Match Pistol

My normal shooting protocol with any new pistol consists of firing enough rounds to determine functional reliability before accuracy and chronograph readings are taken. This initial test was conducted using the two supplied 8-round Novak magazines, and 100 rounds of Armscor Precision 230 gr. FMJ ammunition. The pistol was discharged from a distance of 10 yards, using a modified Weaver stance.

The Birchwood Casey Shoot-N-C 8″ target shows that most of the shots fired were slightly left of dead center. As I tend to sometimes pull my shots to the left, I decided to forego any sight adjustments until accuracy testing commenced. Ejected casings consistently landed four to five feet to the right of my firing position. All 100 rounds fed and ejected without incident. The RIA Match handles recoil admirably, and is easily brought back on target during rapid fire.

During this phase of the test, I decided to try some Hornady 200gr. TAP FPD +P ammunition was kindly provided to M1911.ORG for use in conducting pistol tests. This is a relatively new type of jacketed hollow point, and I felt that if a problem with feeding JHP rounds was to appear, this would provide a good test.

Twenty rounds into the Shoot-N-C target provided ample proof that the RIA Match will reliably feed this type of JHP ammunition. Subsequent accuracy tests with a variety of factory FMJ and JHP ammo produced no malfunctions. I moved my shooting position to take advantage of a natural tree wind-break, but this forced me to shorten my range to 20 yards. All of the above readings and accuracy tests were made at 25 yards, except the Armscor results. From that point to the end of my shooting session, all firing was done from 20 yards.

The NRA target pictured above was engaged with 5 rounds of Armscor Precision 230 gr. FMJ at a distance of 20 yards. This group represented my best of the day, although later groups were centered on the target much better. A one click adjustment on the LPA rear sight brought everything in line. Memorizing the most ideal setting, I made several adjustments to the rear sight to determine how far a click would affect the impact on the target. Considering the windy conditions, I estimated that one click would account for one inch of impact difference at 60 feet. That is on a par with my previous encounters with adjustable sights on 1911 type pistols.

Total round count for the test exceeded 500. More of the full metal jacket ammunition was expended than the jacketed hollow point loads, but that is more a factor of cost per box than what the pistol prefers to digest. The donated ammunition from Armscor and Hornady is greatly appreciated. In addition to the ammunition mentioned in the accuracy and velocity table, I fired the following brands: Winchester SilverTip 185 gr., Speer Gold Dot Hollow Points 185 & 230 gr., Federal Hydra-Shok 165 & 230 gr., Taurus Copper Hollow Points 185 gr., and Remington Golden Saber 230 gr. Twenty rounds of each brand were fired through the RIA Match, with no failures of any kind.

Evaluation

The Rock Island Armory FS Match .45 ACP pistol is assembled and fitted in the Custom Shop at Armscor, in the Philippines. As stated earlier in this review, the slide and frame are hand fitted, and the rest of the components of the gun consist of parts that are made by Armscor. These parts are primarily Metal Injected Moldings, as told to me by Ivan Walcott. The M1911.ORG Forum is full of positive and negative comments concerning the use of MIM in handguns. Correctly manufactured parts that are covered by a Limited Lifetime Warranty should cause no denigration of the quality found in a Rock Island pistol. A manufacturing fact of life is represented by the use of MIM parts. They do not require labor intensive fitting, and allow the manufacturer to pass cost savings on to the consumer. I have thus far tested three guns that are either solely a Rock Island product, or that contained major components from Armscor. I have found nothing wrong with the quality of any of those three examples. I might add that I normally put more ammunition through a test pistol in the course of a review, than a majority of handgun owners would fire in a span of months. I have experienced zero failures in my test samples.

The Parkerized finish held up to several hundred rounds of various types of ammunition being discharged. In fact, the finish on the RIA Match is superior, in my estimation, to those of the previous test pistols, and the aforementioned guns had a dandy finish! I don’t keep a test pistol long enough to measure the effects of holster wear on the finish.

From the time the pistol was removed from its box until I cleaned it and re-packaged it, the trigger pull was excellent. The sear released at a consistent 4.25 pounds of pressure. This exceptional trigger pull, coupled with the adjustable sights and the hand fitting of the slide and frame, make for a wonderfully accurate handgun. Although windy conditions forced me to shorten my testing distance to 20 yards, I feel certain that the RIA Match would have delivered the same degree of accuracy at my normal distance of 25 yards. The bright fiber-optic orange front sight is easily picked up through the LPA adjustable rear sight.

Although I had some issues with earlier test guns and their stocks, I find that I grip these pistols in a different manner than my personal 1911s. That different grip allows me to keep my hand stationary throughout my range sessions, which ultimately yields better results on the target. Perhaps too, it is the type of beaver-tail grip safety that is standard on these target models. In either case, the “feel” of the pistols is growing on me, and I cannot find reason to complain.

I am yet to encounter a Rock Island pistol that refuses to eat hollow point ammunition. While the RIA owner’s manual specifically states that the guns are not warranted to reliably feed this type of ammo, it is gratifying to know that these guns are built to shoot a variety of factory loads and configurations.

My déjà vu reference in the opening of this test/review had to do with the similarities between the Rock Island Match pistol and the STI Spartan that was previously tested. Each of these guns is accurate, a pleasure to shoot, and an economical way to buy a target-grade pistol. However, I must be fair and state that I prefer the Rock Island Match because of the ease of disassembly. While my carpel tunneled and arthritic 57 year old hands can still manage quite a bit, anything that provides easier use is appreciated. I also favor the use of straight rear cocking serrations on my personal guns, and the RIA Match delivers on this option. The Rock Island handgun does not have front cocking serrations, a positive omission in my book. Finally, there is the absence of any type of firing pin safety on this weapon. That non-feature alone gets an A+.

Ivan Walcott (Sales Manager for Advanced Tactical Firearms, the importers of RIA pistols to the United States) states that the suggested retail price of the Rock Island Armory FS Match pistol will be in the plus or minus range of 650.00 U.S. dollars. Considering the quality and accuracy of this gun, I would rate this handgun as a “best buy.”

Acknowledgements

I would like to thank President Martin Tuason and Sales Manager Ivan Walcott of Advanced Tactical Firearms International Corporation, for providing the Rock Island Armory Match .45 ACP pistol used in this test. As soon as the handgun was available to them, it was sent to me for testing. We strive to provide the readers of the M1911.ORG E-zine with the most up-to-date information. In addition, these fine gentlemen also provided me with several boxes of Armscor Precision .45 ACP ammunition. This was my first exposure to this highly accurate, clean burning ammo. I was quite pleased with its performance, and I recommend it to anyone looking for quality in affordable ammunition.

My thanks go out to Hornady Mfg. Company for their donation of several boxes of their new 200 gr. TAP FPD +P .45 ACP ammunition. I have been pleased with the results in my shooting tests with this ammo, and I look forward to conducting some personal ballistic tests with this brand in the future.

As always, my Competitive Edge Dynamics Millennium chronograph performed above and beyond my expectations. Frankly, the chronograph put up with the wind better than I did!

Finally, I am indebted to Bill Lamb at GREAT GUNS in Burleson, Texas. He consistently stays on top of the test pistol situation, as well as providing a variety of factory ammunition, accessories, and gun expertise. I couldn’t do it without you, Bill, and I am obliged. Many thanks are expressed to your daughter, as well, for her assistance last week.

You may discuss about this pistol, ask questions or in general discuss about this review, in this thread in our Forums Site:

http://forum.m1911.org/showthread.php?t=26573

CRKT Hissatsu

December 9, 2006

Made by CRKT this knife is a copy of an ancient Japanese design. Very sharp as are all CRKT’s. It has a Kraton handle with a small design on one side of the handle so that you will know the orientation of the blade even if it’s to dark to see it. I’m always throwing knives and much to my surprise it throws rather well. It turns 2 times at 15 feet.

Wade Custom Bowie

December 9, 2006

In 1981 I met a Special Forces soldier in Little Rock who’s hobby was making large fighting knives. I told him what I had in mind and the picture above is how it turned out. Back then it cost me $150. Even then it was a bargain. It’s a real heavy duty knife with Micarta handles and brass bolsters. It’s stamped Wade 001. It’s a one of a kind for sure.

Follow

Get every new post delivered to your Inbox.

Join 202 other followers